Enacted in 30 January, 2001
Revised 20 March, 2013
The International Journal of Fuzzy Logic and Intelligent Systems (pISSN 1598-2645, eISSN 2093-744X) is 0dedicated to the dissemination of well-defined theoretical and empirical studies results that have potential impact on the realization of intelligent systems based on fuzzy logic and intelligent systems theory. Specific topics include, but are not limited to: a) computational intelligence techniques including fuzzy logic systems, neural networks and evolutionary computation; b) intelligent control, instrumentation and robotics; c) adaptive signal and multimedia processing; d) intelligent information processing including pattern recognition and information processing; e) machine learning and smart systems including data mining, intelligent service practices; f) fuzzy theory and its applications.
1. Copyright & Creative Commons Attribution Licensing
The copyright and the transfer right of the digital content of the published paper and Journal is owned by the Korean Institute of Intelligent Systems. All published materials are also assigned a Creative Commons Attribution License (http://creativecommons.org/licebses/by-nc/3.0/). The Journal accepts manuscripts for consideration with the understanding that the manuscript has not been published previously and is not currently under consideration for publication elsewhere, and in addition the authors (or their employer, if it holds the copyright) are authorizing the transfer of the copyright to the Institute, when the manuscript is submitted.
2. Research & Publication Ethics
Authors, editors, and publisher all have ethical obligations with regard to the publication of the results of research. For the policies on research and publication ethics that are not stated in these instructions, please refer to the Committee on Publication Ethics (COPE) Guidelines (http://publicationethics.org/resources/code-conduct).
Authorship should be credited based only on substantial contributions to conception and design, or analysis and interpretation of data, and drafting the article or revising it critically for important intellectual content, and final approval of the version to be published. All authors are responsible for the accuracy, quality, and ethics of the work. After the initial submission of a manuscript, any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. The content of this letter must be acknowledged and agreed by all authors of the paper.
2.2 Conflicts of Interest
If there are any conflicts of interest, authors should disclose them in the manuscript. Examples of potential conflicts of interest are financial support from companies, connections to companies, and political pressure from interest groups. In particular, all sources of funding applicable to the study should be explicitly stated.
2.3 Overlapping Publications
All submitted manuscripts should be original and should not be considered by other scientific journals for publication at the same time. Any part of the accepted manuscript should not be duplicated in any other scientific journal without the permission of the Editorial Board. If duplicate publication related to the papers of this journal is detected, the authors will be announced in the journal, their institutes will be informed, and the authors will be penalized.
Plagiarism is the use of others' published and unpublished ideas or words (or other intellectual property) without attribution or permission, and presenting them as new and original rather than derived from an existing source. Plagiarism is scientific misconduct and should be addressed as such. If some part of the article is published elsewhere in print or online by the authors, it should be stated. The editors should make decisions about a manuscript based only on its importance, originality, clarity, and relevance to the Journal's scope and content. If there are any ethical issues from the manuscripts, it should be first reviewed by Editorial Board and the recommendation should be processed by the supporting Institute.
3. Submission of Manuscripts
All correspondence concerning submission is between the contributors and the Editor-in-Chief. The Journal receives manuscripts only through the electronic submission system, e-submission at http://www.ijfis.org. The system provides the standard submission process in steps, and asks the contributors to upload manuscripts in the PDF or Microsoft Word files for review along with the scanned copyright transfer form. The contributors are kindly asked to use the standard submission formats provided in the following links, MS-Word and LaTex. The contributors can keep track of the stage of review process on the electronic submission system.
4. Peer Review
Review management is under the direction of an editor who will solicit three reviews for each submission. The editor will ordinarily wait for at least two reports before a decision is reached. The review process can be repeated till three times if the request of revision is suggested by reviewers. If the review is repeated more than three times, it may not be considered for publication. If two reviewers do not agree to accept the article, it may not be considered for publication.
5. Publication Type
The Journal publishes papers under 5 categories: regular papers, correspondence, review papers, technical report, editorial, book review.
∙ Regular papers normally have a length of 6–10 pages of A4 size papers to report original research results or a well-focused survey on specific theories. Longer manuscripts will be considered, but have a proportionately lower probability of acceptance.
∙ Correspondences are reports of preliminary results or short reports on completed works that are of current interest to many researchers in the field. Comments on material previously published in the Journal, suggestions for new directions, and errata could be included. Their lengths must be less than 4 pages.
∙ Review papers will be published by direct submission as well as from invited experts. In both cases, the work will be subject to editorial review. Review papers should critically review topics not only to inform the reader of the background, but also to communicate the state of the art and outstanding research problems. A review is organized as follows: title page including abstract and keywords, introduction, body text, conclusions or summary, acknowledgments, and references. Their lengths must be less than 10 pages.
∙ Technical reports are articles in this category introduce scientific work on novel skills dealing with new methods and techniques with results obtained from the methods.
∙ Editorial is an invited perspective in fuzzy logic and intelligent systems theory, dealing on very active areas of research, fresh insights and debates.
6. Manuscript Preparation
All manuscripts should be written in good English. This is the responsibility of the authors, not the editors. Contributors for whom English is not a native language are recommended to get professional helps for English prior to submission. The electronic submission system (http://www.ijfis.org) provides the standard formats for manuscripts in MS-Word and LaTex. All manuscripts should be prepared according to the following guidelines.
6.1 Title Page
The Title page must include a full title of the article, each author’s full name, institutional affiliations and address (department, institution, city, country). The title should be specific and identify the research significance of the manuscript and without acronymic words. Must list e-mail address of the author who will receive correspondence and reprint requests. And it must contain the following information: acknowledgments of research supports; list of where and when the study has been presented in part elsewhere, if applicable; running head of fewer than 50 characters.
6.2 Abstarct and Keywords
The Abstract should be self-contained and should not exceed 250 words. It should include the 1) Purpose, 2) Theory or Methods, 3) Results, and 4) Conclusion. There should be no abbreviations in the abstract. At the end of the abstract, Keywords should be given in 3 to 6 words or phrases.
6.3 Main Text
The manuscript should be presented in a structured format, 1) Introduction, 2) Related Works, 3) Theory or Methods, 4) Experiments or Analysis, and 5) Conclusion.
6.3.1 Text section heading
There are three levels of section headings with established specifications: primary, secondary, tertiary, and quartiary headings. Enumeration of section heads is required. The section headings are as follows:
1. Primary Heading
1.1 Secondary Heading
1.2.1 Tertiary heading
1) Quartiary heading
6.3.2 References in text
References should be obviously related to the documents. References should be numbered consecutively in the order in which they are first mentioned in the text. Each reference should be cited as , [1, 4, 5], or [1-3]; Kim , Kim and Lee  and, Park et al. .
6.3.3 Tables and Figures in text
All Tables and Figures are mentioned in the text: Table 1, Tables 1, 2, Tables 1–3, Figure 1, Figures 1, 2, Figures 1–3. When the text refers to both figures and tables, they are mentioned: Table 1, Figure 2, or (Tables 1–3, Figures 4–6), et al.
The list of References should only include works that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. The correct citation format for an article is as follows:
 T. J. Ross, Fuzzy Logic with Engineering Applications, 3rd ed., Chichester: John Wiley & Sons, 2010.
 S. Zhang, J. Yin, and W. Guo, "Pool-base active learning with query construction," in Foundations of Intelligent Systems, Y. Yang and T. Li, Eds. Berlin: Springer-Verlag, 2011, pp.13-22.
 Y. H. Kim, H. Lee, and S. Kim, "3D radar objects tracking and reflectivity profiling," International Journal of Fuzzy Logic and Intelligent Systems, vol. 12, no. 4, pp. 263-269, Dec. 2012. http://dx.doi.org/ 10.5391/IJFIS.2012.12.4.263
PUBLISHED CONFERENCE PROCEEDINGS
 S. Montalvo, E. G. Pardo, R. Martinez, and V. Fresno, "Automatic cognate identification based on a fuzzy combination of string similarity measures," in Proceedings of 2012 IEEE International Conference on Fuzzy Systems, Brisbane, 2012, pp.1-8. http://dx.doi.org/10.1109/FUZZ-IEEE.2012.6250802
PAPERS PRESENTED AT CONFERENCES
 J. Arrillaga and B. Giessner, “Limitation of short-circuit levels by means of HVDC links,” presented at the IEEE Summer Power Meeting, Los Angeles, CA, July 12–17, 1990, Paper 70 CP 637.
DISSERTATIONS (PH.D.) AND THESES (M.S.)
 A. De, "Fuzzy result merging models for metasearch," Ph.D. dissertation, Department of Computer Science, University of Louisiana at Lafayette, Lafayette, LA, 2006.
 J. C. Kim, "Local path planning algorithm based on candidate trajectory optimization," M.S. thesis, Korea Advanced Institute of Science and Technology, Daejeon, Korea, 2009.
 S. Scott, "A Markov random filed topic space model for document retrieval," Available http://arxiv.org/pdf/1111.6640.pdf
Each Table should include column heads, footnotes, and data. The table should list all abbreviations in the table in footnotes at the end. Tables should be numbered according to their order of mention in the text. Each table must be submitted as an electronic file. Omit internal horizontal and vertical lines. A title of table is concise and describes the table’s contents. The table should be self-explanatory and supplement, not duplicate the text. If the table or any data therein have been published, a footnote to the table must give permission information to the original source. The structure should be clear, with simple column headings giving all units. A table should not exceed one page when printed. Use lower case letters in superscripts a), b), c) ... for special remarks. Unaltered computer output and notation are generally unacceptable.
6.6 Figure and Legends for Illustrations
Figures are numbered consecutively in the sequence mentioned in the text and must have a caption written in one paragraph style. The caption should contain an explanation of all abbreviations and symbols used, and indicate the size value of lines or bars unless shown directly on the figure. In multi-part figures, the legends should distinguish (a), (b), (c), etc., components of the figure. Figures should be submitted as Tiff or EPS file format. If the only possible file format is JPEG, it must be in highest quality with minimum compression. It is recommended to size original figure widths to 4 inches wide. The minimum requirements for digital resolution are:
∙ 900 DPI/PPI for black and white images, such as line drawings or graphs.
∙ 300 DPI/PPI for picture-only photographs.
∙ 600 DPI/PPI for photographs containing pictures and line elements, i.e., text labels, thin lines, arrows.
The Acknowledgments section is the general term for the list of contributions, disclosures, credits, and other information included at the end of the text of a manuscript but before the references. Co-workers and others who contributed significantly to the current study, but were not co-authors, should be mentioned in the acknowledgements. All sources of financial and other support should also be stated. Authors must obtain written permission to include the names of all individuals included in the Acknowledgments section.
6.8 Units and Abbreviation
If authors describe length, height, weight, and volume, they should use standard metric units. Temperature should be given in degrees Celsius. All others should follow the International System of Units (SI). All units must be preceded by one space except percentage (%) and temperature (°C).
Abbreviations must be used as an aid to the reader, rather than as a convenience of the author, and therefore their use should be limited. Generally, avoid abbreviations that are used less than 3 times in the text, including tables and figure legends. Standard SI abbreviations are recommended. Other common abbreviations are as follows (the same abbreviations are used for plural forms): h (hour), min (minute), s (second), d (day), wk (week), mo (month), y (year), L (liter), mL (milliliter), μL (microliter), g (gram), kg (kilogram), mg (milligram), μg (microgram), ng (nanogram), pg (picogram), g (gravity; not g), nm (nanometer), μm (micrometer), mV (milivoltage), mA (miliampere), mW (miliwatt), C (coulomb), μF (microparad), mH (milihenry), n (sample size), SD (standard deviation of the mean), and SE (standard error of the mean).
6.9 Mathematical Notation
For convenience of citation of equations, authors are encouraged to number all displayed equations. Equations should not be referred to by their numbers alone; e.g., say "substituting in Eq. (21)" rather than "substituting in (21)." Mathematical notation should be clear, distinct, and consistent throughout the manuscript. Care should be taken to distinguish between O (capital oh), o (lower-case oh), and 0 (zero); l (alphabet el) and 1 (one); ε (epsilon), and ∈ (set membership symbol); k (italic kay) and κ (Greek kappa); v (italic vee) and ν (Greek nu); and φ (Greek phi) and ∅ (empty set symbol). Vectors are normally distinguished by bold lower case type (e.g., b); arrows over symbols are not recommended to denote vectors. Matrices are normally distinguished by bold upper case type (e.g., M). If other fonts are needed to distinguish functions or other operators from italic (R), script (calligraphic) characters (ℛ) are preferred.
7. Final Preparation for Publication
7.1 Format of Final Contributions
Upon acceptance of an article, the author or authors are asked to submit the final manuscript. The contributors are kindly asked to use the standard submission formats provided in the following links, MS-Word and LaTex.
7.2 Manuscript Editing
The finally accepted manuscript will be reviewed by manuscript editor for the consistency of the format and the completeness of references. The manuscript may be revised according to the opinion of the manuscript editor.
7.3 Page Proofs
Authors will be given an opportunity to review the laser printed version of their manuscripts before printing. One set of page proofs in PDF format will be sent by e-mail to the corresponding author. The review should be solely dedicated to detection typographical errors. Editorial changes and corrections are not to be made at that time. To meet production deadlines, a rapid turnaround of these proofs is necessary.
8. Page Charges and Access to the Issues
The corresponding author is charged US$ 300.00 up to 8 pages, additional $50.00 each extra page, for his accepted manuscript. The published articles are open accessible on the web http://www.ijfis.org. The members of Korea Institute of Intelligent Systems receive the journal issues in print.
Statement of Copyright Transfer
To: Editor of International Journal of Fuzzy Logic and Intelligent Systems
Title of submitted manuscript: __________________________________________________________
I hereby certify that I agreed to submit the manuscript entitled as above to International Journal of Fuzzy Logic and Intelligent Systems:
● This manuscript is original and there is no copyright problem, defamation, and privacy intrusion. Any legal or ethical damage should not be directed to the Korean Institute of Intelligent Systems due to this manuscript.
● All authors contributed to this manuscript actually and intellectually and have responsibility equally to this manuscript.
● This manuscript was not published to any other scientific journals in the world.
● opyright of this manuscript shall be transferred to the Korean Institute of Intelligent Systems.
Representative Author : _________________________________________ (Print Name)
Signature : ______________________________________ Date : _________________________
ORCHID number: ____________________________________
* 파일다운로드 : Statement of Copyright Transfer